Description
Description
Upon the unusual bending curves and rounded corners, the Bouroullec brothers designed the Palissade Dining Bench to perform along with nature. Its curved back support naturally flows into the seat and back down into the frame of the bench to make all one flawless piece. With or without cushions, this bench can perform anywhere outdoors.
Dimensions & Sizes
Dimensions & Sizes
The Palissade Dining Bench has an overall height of 31.5” (80 cm), length of 50.5” (128 cm), depth of 27.75” (70.5 cm), and seat height of 17.75" (45 cm).
Description
Description
Upon the unusual bending curves and rounded corners, the Bouroullec brothers designed the Palissade Dining Bench to perform along with nature. Its curved back support naturally flows into the seat and back down into the frame of the bench to make all one flawless piece. With or without cushions, this bench can perform anywhere outdoors.
Dimensions & Sizes
Dimensions & Sizes
The Palissade Dining Bench has an overall height of 31.5” (80 cm), length of 50.5” (128 cm), depth of 27.75” (70.5 cm), and seat height of 17.75" (45 cm).
3D Model
3D Model
Common Questions
Common Questions
Benches
+
Benches
+
How tall are benches?
The height of a bench is typically between 18 and 20 inches (46-51 cm). Although this is the average range, the height of a bench is dependent on its use.
How deep are benches?
Benches can have a depth anywhere from 15-20 inches (38-51 cm), although the typical bench used for dining is considered to be around 17 ½ inches (44 cm). A depth (or width) past 20 inches (51 cm) will not be as comfortable for the average person to sit on.
How long are benches?
On average, bench length can range from 42 and 60 inches (107-152 cm). A bench within the 42 to 50 inch (127 cm) range is able to seat two people.
How tall are benches?
The height of a bench is typically between 18 and 20 inches (46-51 cm). Although this is the average range, the height of a bench is dependent on its use.
How deep are benches?
Benches can have a depth anywhere from 15-20 inches (38-51 cm), although the typical bench used for dining is considered to be around 17 ½ inches (44 cm). A depth (or width) past 20 inches (51 cm) will not be as comfortable for the average person to sit on.
How long are benches?
On average, bench length can range from 42 and 60 inches (107-152 cm). A bench within the 42 to 50 inch (127 cm) range is able to seat two people.
Dining Room Furniture
+
Dining Room Furniture
+
What furniture pieces go in a dining room?
Furniture pieces that go in a dining room are dining tables, dining chairs, wine racks, bar carts, bar stools, and buffet tables. Other furniture pieces include china cabinets, dining benches, wall shelves, rugs, and drapery. Accessories for your furniture include candles, placemats, plants, table linens, and lighting fixtures.
How do you arrange furniture in a living room and dining room combo?
When arranging furniture in a living room and dining room combo make sure to maximize the space by incorporating dual purpose furniture. Arrange the furniture by defining the functional spaces, use the room’s architectural design to your advantage, and play with the versatility of each piece of furniture.
How do you choose a style for your dining room?
Choosing a style for your dining room is a personal choice, and dependent on your preferences. Gather inspiration images from dining rooms that you like and choose a focal object to style everything around on. Then choose the lighting elements, décor accents, as well as paint color.
What furniture pieces go in a dining room?
Furniture pieces that go in a dining room are dining tables, dining chairs, wine racks, bar carts, bar stools, and buffet tables. Other furniture pieces include china cabinets, dining benches, wall shelves, rugs, and drapery. Accessories for your furniture include candles, placemats, plants, table linens, and lighting fixtures.
How do you arrange furniture in a living room and dining room combo?
When arranging furniture in a living room and dining room combo make sure to maximize the space by incorporating dual purpose furniture. Arrange the furniture by defining the functional spaces, use the room’s architectural design to your advantage, and play with the versatility of each piece of furniture.
How do you choose a style for your dining room?
Choosing a style for your dining room is a personal choice, and dependent on your preferences. Gather inspiration images from dining rooms that you like and choose a focal object to style everything around on. Then choose the lighting elements, décor accents, as well as paint color.
Chairs | Seating
+
Chairs | Seating
+
How tall is a typical seat?
Seats are typically required to be between 16 to 20 inches (40.6 cm – 50.8 cm) tall and at least 18 inches (45.7 cm) deep. If backs are present on the seats, they typically are at least 14 inches (35.5 cm) high. If the seat has armrests, they should support the arms without raising the shoulders.
How do you clean fabric chairs?
Clean fabric chairs by steaming or using the vacuum’s upholstery attachment and vacuuming the chair carefully. Be sure to also check the tags of your chair to figure out the most adequate way of cleaning it. Any stains should be removed with a cleaning solution for the type of fabric on your chair.
How do you reupholster a chair?
Start reupholstering a chair by removing the old fabric carefully without ripping any pieces as they will serve as patterns. Then replace any worn batting and make the new pattern pieces by tracing the original pieces. Attach the new fabric to the chair with a staple gun, then make and attach the welting. Finish off by covering back and underside of the chair.
How tall is a typical seat?
Seats are typically required to be between 16 to 20 inches (40.6 cm – 50.8 cm) tall and at least 18 inches (45.7 cm) deep. If backs are present on the seats, they typically are at least 14 inches (35.5 cm) high. If the seat has armrests, they should support the arms without raising the shoulders.
How do you clean fabric chairs?
Clean fabric chairs by steaming or using the vacuum’s upholstery attachment and vacuuming the chair carefully. Be sure to also check the tags of your chair to figure out the most adequate way of cleaning it. Any stains should be removed with a cleaning solution for the type of fabric on your chair.
How do you reupholster a chair?
Start reupholstering a chair by removing the old fabric carefully without ripping any pieces as they will serve as patterns. Then replace any worn batting and make the new pattern pieces by tracing the original pieces. Attach the new fabric to the chair with a staple gun, then make and attach the welting. Finish off by covering back and underside of the chair.
Design Within Reach
+
Design Within Reach
+
Why is authenticated furniture important?
Authenticated furniture ensures that pieces are genuine, upholding quality, durability, and resale value. Authentic items reflect the original designer's vision, craftsmanship, and materials, offering a unique aesthetic and functional experience. Verification protects consumers from counterfeit products, ensuring they receive true value for their investment and preserving the integrity of iconic designs.
Did Herman Miller buy Design Within Reach?
Herman Miller acquired Design Within Reach in 2014. This purchase allowed Herman Miller to expand its reach into the retail segment, offering high-quality modern furniture directly to consumers. Design Within Reach's unique product offerings and strong retail presence complemented Herman Miller's established brand, creating a synergy between the two companies.
Do authenticated furniture designs last longer than counterfeit furniture?
Authentic furniture designs often last longer than counterfeit furniture. Genuine pieces are made using high-quality materials, superior craftsmanship, and adhere to the original designer's specifications, ensuring durability and longevity. Counterfeit furniture, on the other hand, typically cuts corners in material and craftsmanship to reduce costs, which can compromise the furniture's lifespan and performance. While there are exceptions, authentic designs generally offer a better long-term investment in terms of wear and lifespan.
Why is authenticated furniture important?
Authenticated furniture ensures that pieces are genuine, upholding quality, durability, and resale value. Authentic items reflect the original designer's vision, craftsmanship, and materials, offering a unique aesthetic and functional experience. Verification protects consumers from counterfeit products, ensuring they receive true value for their investment and preserving the integrity of iconic designs.
Did Herman Miller buy Design Within Reach?
Herman Miller acquired Design Within Reach in 2014. This purchase allowed Herman Miller to expand its reach into the retail segment, offering high-quality modern furniture directly to consumers. Design Within Reach's unique product offerings and strong retail presence complemented Herman Miller's established brand, creating a synergy between the two companies.
Do authenticated furniture designs last longer than counterfeit furniture?
Authentic furniture designs often last longer than counterfeit furniture. Genuine pieces are made using high-quality materials, superior craftsmanship, and adhere to the original designer's specifications, ensuring durability and longevity. Counterfeit furniture, on the other hand, typically cuts corners in material and craftsmanship to reduce costs, which can compromise the furniture's lifespan and performance. While there are exceptions, authentic designs generally offer a better long-term investment in terms of wear and lifespan.
Related Collections
Related Collections
