Search Results

Hydraulic Elevators are lift systems that use a hydraulic piston to raise and lower the elevator car. Hydraulic Elevators are typically used for low and mid-rise buildings and have a hydraulic piston below the elevator pit. The hydraulic piston sheave and cylinder is located below the elevator pit and must be at least the overall rise plus 4’-7’ (1.2-2.1 m). Hydraulic Elevators have a low initial cost but are limited by a slow travel speed of 200’ (61 m) per minute and a limited distance of approximately 60’ (18.3 m). Hydraulic Elevators have an elevator pit depth of 4’-6’ (1.2-1.8 m) and require an additional machine room at the ground floor adjacent to the elevator shaft.

Machine-Room-Less (MRL) Elevators are modern traction lift systems that uses an electric hoisting machine located within the top of the elevator shaft to hoist the elevator car. Machine-Room-Less (MRL) Elevators travel at a speed of 500’ (152 m) per minute with a maximum distance of up to 250’ (76 m). A control room is required at the highest elevator landing and must be adjacent to the elevator shaft and within 150’ (46 m) of the machine.

Traction Elevators are lift systems that use an electric hoisting machine and hoisting cables to raise and lower the elevator car vertically along guide rails. Traction Elevators are a common system for many mid-rise and high-rise structures and require a penthouse machine room and counterweight. Geared Traction Elevators are slower at 500’ (152 m) per minute and can travel a maximum of 250’ (76 m). Gear-less Traction Elevators have faster speeds of up to 2,000’ (610 m) per minute and can travel up to 2,000’ (610 m).‍ Penthouse machine rooms for Traction Elevators have heights between 10’-12’ (3-3.7 m). The elevator pit depth for a Traction Elevator is in the range of 5’-12’ (1.5-3.7 m) depending on the application.

Six Lift Elevator Banks are medium to high capacity layouts used in buildings with large occupancy loads. Based on a range of project specific conditions, Six Lift Elevator Banks should be used for offices with floor areas around 270,000 ft2 (25,084 m2), hotels with 450 rooms, or 540 housing units. Combining two rows of lifts around a central waiting area with a clearance width of 10’6” (3.2 m), or 1.75x car depth, Six Lift Elevator Banks have typical widths of 27’ (8.2 m) and depths of 27’ (8.2 m). Six Lift Elevator Banks have overall areas around 704 ft2 (65 m2).

Two Lift Elevator Banks are low capacity layouts used in buildings with limited occupancy loads and demands. Two Lift Elevator Banks should be used for offices with floor areas around 90,000 ft2 (8,361 m2), hotels with 150 rooms, and housing projects with 180 units. Combining a single row of lifts and an adjacent waiting area with a clearance width of 10’ (3 m), or 1.5x car depth, Two Lift Elevator Banks have typical widths of 18’ (5.5 m) and depths of 18’6” (5.6 m). Two Lift Elevator Banks have overall areas around 333 ft2 (31 m2).

Four Lift Elevator Banks are medium capacity layouts used in buildings with medium average occupancy loads. Four Lift Elevator Banks should be used for offices with floor areas around 180,000 ft2 (16,723 m2), hotels with 300 rooms, and housing projects with 360 units. Combining one row of lifts and an adjacent waiting area with a clearance width of 10’ (3 m), or 1.5x car depth, Four Lift Elevator Banks have typical widths of 36’ (10.9 m) and depths of 18’6” (5.6 m). Four Lift Elevator Banks have overall areas around 658 ft2 (61 m2).

Three Lift Elevator Banks are low to medium capacity layouts used in buildings with low to medium average occupancy loads. Three Lift Elevator Banks should be used for offices with floor areas around 135,000 ft2 (12,542 m2), hotels with 225 rooms, and housing projects with 270 units. Combining a single row of lifts and an adjacent waiting area with a clearance width of 10’ (3 m), or 1.5x car depth, Three Lift Elevator Banks have typical widths of 27’ (8.2 m) and depths of 18’6” (5.6 m). Three Lift Elevator Banks have overall areas around 494 ft2 (46 m2).

Eight Lift Elevator Banks are high capacity layouts used in buildings with large occupancy loads. Based on the project, occupancy, and wait times, Eight Lift Elevator Banks should be used for offices with floor areas around 360,000 ft2 (33,445 m2), hotels with 600 rooms, and housing of 720 units. Combining two rows of lifts around a central waiting area with a clearance width of 12’ (3.7 m), or 2x car depth, Eight Lift Elevator Banks have typical widths of 36’ (10.9 m) and depths of 28’ (8.5 m). Eight Lift Elevator Banks have overall areas around 992 ft2 (92 m2).

Single car elevators are common lifts used in small to medium sized commercial applications. Best used for smaller structures, a single car elevator system can come in a variety of car sizes to meet desired loads in buildings without high peak daily traffic or volume demands.

Elevators, or lifts, are vertical transportation systems used in buildings to move people and goods between different floors. Their layouts vary based on building type and usage. In residential buildings, elevators are typically smaller, designed for a few people.Elevator layouts have evolved signif

Elevators, or lifts, are vertical transportation devices that move people and goods to various levels and floors of a structure. Designed with a cab that is either pushed or pulled vertically through space via a combination of machines and hoists, Elevators use either Traction or Hydraulic systems.

The Art Easel Floor Lamp is ideal for artists or those who want to light up their artwork, pictures, and photos. The dual floor easel/lamp is designed by Brett Beldock who was inspired by downlight fixtures of the 1980s, hence hard to overlook as it elevates any space to an extra dimension. The Art Easel Floor Lamp has an overall height of 69” (175.3 cm), length of 41” (104.1 cm), and depth of 23” (58.4 cm). The lamp shade has a diameter of 4.5" (11.4 cm) and height of 8.5” (21.6 cm). The base size is 23” x 23” (58.4 x 58.4 cm).

Upgrade to Dimensions Pro and receive access to additional features and perks including the 'Save' feature, an advertisement free experience, and more efficient access to downloads. $4.99/month for the best Dimensions.com experience to date.

Climbing stairs is a way to change elevations quickly. Climbing stairs is done at a steeper angle than can be accomplished by a ramp. Climbing stairs can be done outside, inside, or in a dedicated stairwell. Climbing stairs may be required in some older buildings that do not have elevators.

The Blu Dot Plot Planter (Small) is a compact cylindrical planter elevated on a matching round column and base, all made from powder-coated aluminum for strength and weather resistance. With its petite scale and sculptural profile, this planter is perfect for adding greenery to small outdoor nooks. The Plot Planter (Small) has an overall height of 21.625” (55 cm) and diameter of 10.25” (26 cm). The weight of the Plot Planter (Small) is 9 lb (4.1 kg).

Hanging Aussie Rambler (Carpobrotus glaucescens), also known as Pigface or Coastal Pigface, is a trailing succulent used ornamentally in elevated planters and baskets. With its thick, fleshy, gray-green triangular leaves and vibrant pink daisy-like blooms, it spills gracefully over edges. Aussie Rambler (Hanging) has a typical overall height between 6”-12” (15-30 cm) and spread diameter of 2’6”-4’6” (76-137 cm).

Subway platforms serve as transition points in the underground transportation system, facilitating passenger movement between trains and surface-level streets. Designed for safety, they often feature tactile paving, lighting, safety barriers, and clear demarcations for standing zones. Subway Platforms are constructed with typical platform widths between 8'2"-9'10” (2.5-3 m), a platform height of 36” (91.5 cm), and total platform lengths of 492’-590’ (150-180 m).

Escalators are moving stairways designed to carry people smoothly between different levels in a building or public space. They combine the familiarity of stairs with the efficiency of continuous motion, making them especially useful in busy environments like airports, malls, and transit stations.

The High Fowler’s position is an upright medical position where the patient sits elevated with head and upper body raised at an angle between 60°-90° in relation to the lower body. The High Fowler’s position is used for feeding, improved breathing, x-rays, grooming, and other upright circumstances.

The Snowhill Settee features velvet upholstery and rubberwood, splayed legs. Designed by Corrigan Studio, the classic silhouette of the Snowhill Settee is elevated via its seashell backrest. The ultimate result is a functional and elegant piece of furniture with details of mid-century modern design. The Snowhill Settee has an overall height of 28” (71 cm), length of 50” (127 cm), and depth of 28.5” (72 cm). The seat height of the Snowhill Settee is set at 18.5” (47 cm).

The TOTO Flotation Tub (Zero Dimension) is an oval-shaped tub sporting hydro hand massaging water jets, adjustable headrest, and mood creating LED lighting system. The tub's shape and design provide bathers zero-gravity experience for relaxation and features an electrostatic touch controller. The TOTO Flotation Tub with Zero Dimension has an overall height of 30.6875” (77.9 cm), length of 86.625” (220 cm), width of 41.3125” (104.9 cm), and total depth of 15.5” (39.4 cm).

Modern wall mounted double bathroom vanities are elegant solutions for master or shared bathrooms with enough space to accommodate two people comfortably while providing enough storage for everyone. Wall mounting a vanity frees up the ground surface and makes for a more sleek modern aesthetic. The Modern Wall Mounted Double Bathroom Vanity has an installation height of 34” (86.3 cm) resulting from the 23.75” (60.3 cm) vanity being elevated from the floor by 10.25” (26 cm). The Modern Wall Mounted Double Bathroom Vanity has an overall length of 71.6” (182 cm), depth of 18.5” (47 cm), and weighs 270 lb (122.5 kg).

The Torrey Retro Crib is a 3-in-1 convertible with a silhouette line and mid-century appeal. You can convert the Torrey Retro Crib into a daybed or toddler bed and adjusted the height as the baby grows. The crib is easy to assemble and fits in nurseries and low-lying for easy reach. The Torrey Retro Crib has an overall height of 37.5” (95 cm), width of 30.5” (77 cm), and depth of 55.5” (141 cm).

The Brooklyn Island Crib features an additional guard rail and a daybed ideal for a parent who wants to maximize on limited space. This feature makes it easy to convert from a crib to a toddler bed, and into a daybed. The bed can fit in a nursery or kids' room and can be adjusted to three levels. The Brooklyn Island Crib has an overall height of 36” (91 cm), width of 31” (79 cm), and depth of 55” (140 cm).

Flush mounted solar panels are installed directly onto a surface, typically a roof, in parallel alignment, ensuring a low profile and clean aesthetic. Their name derives from the "flush" positioning relative to the mounting surface. This design minimizes wind resistance and visual intrusion. Flush Mounted Solar Panels are commonly organized with multiple rows of panels and varied lengths based on the desired panel quantity. The system height is typically 6” (15 cm) with solar angles matching existing roof angles between 10-60 degrees.

The TipToe Bunk Bed features a sturdy ladder that works on either side of the bed and can convert easily into two separate twin size beds by removing the top bunk. It is an excellent solution for sleepovers or those sharing a room. The TipToe Bunk Bed has an overall height of 67.6” (172 cm), width of 43.1” (109 cm), and length of 81.6” (207 cm). There is a clearance of 26.675” (68 cm) between the top and bottom beds.

The 1-Wide Quarter Circle combination window, composed of separate panels, is a distinctive and modern design that pairs a rectangular lower section with a quarter-circle upper section in a one-panel-wide layout. These independent panels create a visually engaging appearance. 1-Wide, Quarter Circle Combination Windows are available in a range of sizes with overall widths between 2’2”-4’2” (.66-1.27 m), heights ranging from 5’4”-11’4” (1.62-3.45 m), and an overall sill depth of 5” (12.7 cm).

The Blu Dot Hot Mesh Bar Table features a circular powder-coated steel tabletop supported by four tubular steel legs that angle inward and merge into a central vertical base, creating a striking and stable design. Built for indoor and outdoor use. The Hot Mesh Bar Table has an overall height of 40” (101.7 cm) and diameter of 30” (76.2 cm). The weight for the Hot Mesh Bar Table is 23 lb (10.4 kg).

Mountain Stone refers to rock material originating from highland or alpine environments, shaped by geological pressure, erosion, and shifting climates over millennia. These stones are typically angular, rugged, and varied in size, often marked with striations, mineral veins, or weathered surfaces. Mountain Stone has varied overall heights between 18”-48” (46-122 cm) and varied widths in the range of 24”-60” (61-152 cm).