Search Results

Restrooms, public or commercial facilities typically equipped with toilets, sinks, urinals (in men's restrooms), and often hand dryers or paper towel dispensers, are essential in all shared spaces. Layouts prioritize accessibility, hygiene, and efficient traffic flow.

Bathroom stalls and partitions are structures used in public restrooms to ensure privacy for individuals while using the facilities. These dividers separate toilets, urinals, and sometimes sinks, creating individual spaces or "stalls." The primary role of these partitions is to offer privacy.

Urinals are specialized plumbing fixtures designed primarily for males to urinate while standing. They are typically wall-mounted and designed to use less water than conventional toilets, making them an eco-friendlier option for liquid waste disposal.

Restaurants, typically furnished with dining tables, chairs, bar stools, and sometimes booths, are designed to facilitate a seamless flow from the entrance to seating areas, to restrooms, and service areas. The layout varies with dining styles.

Door Pull Handles are the types of handles that are often designed ergonomically to ease the opening and closing of a door. Door Pull Handles are designed to carry out a pulling action by the user and bring doors in the direction of the user.

Bathroom trash cans are designed for disposing of waste in bathroom settings. They are typically smaller than kitchen trash cans, fitting neatly in tighter spaces. Types include pedal bins, which open with a foot lever for hands-free operation, enhancing hygiene.

The urinal 2-wall half bathroom layout is an efficient configuration that places a sink and a urinal on two adjacent walls, utilizing a corner space for optimal functionality. This design is particularly effective in maximizing limited space while providing essential amenities for hygiene. Urinal 2-Wall Half Bathroom layouts have typical widths between 4’3”-4’9” (1.3-1.45 m) and depths of 3’4”-4’4” (1.02-1.32 m). Overall floor areas for Urinal 2-Wall Half Bathrooms are in the range of 14-21 ft2 (1.3-1.9 m2).

The urinal 1-wall half bathroom layout is a compact design that positions a sink and a urinal side by side along a single wall. This efficient setup is particularly well-suited for public or commercial settings, such as restaurants, bars, offices, or entertainment venues, where space is limited. Urinal 1-Wall Half Bathroom layouts have typical widths between 4’6”-6’ (1.37-1.83 m) and depths of 3’9”-4’9” (1.14-1.45 m). Overall floor areas for Urinal 1-Wall Half Bathrooms are in the range of 17-29 ft2 (1.6-2.6 m2).

A quarter bath layout simplifies the concept of a bathroom to its most basic element: a single toilet installed along one wall. This minimalist approach is designed to fit into very small spaces, making it an ideal solution for adding a bathroom facility where space is at a premium. Toilet Quarter Bathroom layouts have typical widths between 2’6”-3’6” (.76-1.07 m) and depths of 4’6”-5’6” (1.37-1.68 m). Overall floor areas for Toilet Quarter Bathrooms are in the range of 11-19 ft2 (1-1.8 m2).

The urinal and toilet 1-wall half bathroom layout arranges a sink, toilet, and urinal side by side along a single wall, creating a streamlined and efficient use of space. This compact design is especially suitable for small or narrow spaces where optimizing square footage is essential. Urinal & Toilet 1-Wall Half Bathroom layouts have typical widths between 6’9”-8’9” (2.06-2.67 m) and depths of 4’6”-5’6” (1.37-1.68 m). Overall floor areas for Urinal & Toilet 1-Wall Half Bathrooms are in the range of 30-48 ft2 (2.8-4.5 m2).

The accessible 2-Wall half bathroom layout is designed with the specific needs of wheelchair users in mind, featuring two essential fixtures: an accessible toilet and sink. These are strategically placed on adjacent walls, framing a central circulation area that provides ample space for moving. Accessible 2-Wall Half Bathroom layouts have minimum widths of 6’6” (1.98 m) and minimum depths of 7’6” (2.29 m). Overall floor areas for Accessible 2-Wall Half Bathrooms are typically 49 ft2 (4.5 m2). To accommodate wheelchairs comfortably, bathrooms must feature a minimum turning space diameter of 60" (1.52 m), ensuring ample room for maneuvering.

Soap dispensers are devices designed to dispense soap in liquid, foam, or powder form. They come in various types, catering to different needs and settings. Manual dispensers, operated by a push button or a pump, are common in households and public restrooms.

Hand dryers are electric devices designed to dry hands without the use of paper or cloth towels. Activated either by a push button or an automatic sensor, they blow warm air to evaporate water from the hands. Commonly found in public restrooms, they provide an efficient alternative to towels.

Public fixtures are the various objects and equipment that serve public functions and are installed in public spaces such as roads, streets, and other shared communal zones. As public fixtures are replaced regularly as cities change, outdated and non-functional public fixtures can inspire nostalgia.

Bathroom fixtures refers to a range of permanently connected plumbing fixtures that commonly include toilets, sinks, bidets, urinals, bathtubs, showers, or both. This group of fixtures are typically included in bathrooms in domestic households, hotels, and public restrooms for personal hygiene uses.

Restaurants have a few different options for their seating layouts to provide privacy to their guests while maintaining proper circulation in the restaurant. Tables can be angled or perpendicular. The layout of the seating can affect the overall atmosphere of the restaurant and should be considered.

The IKEA Ekoln Soap Dish comes with neutral color tones that go well with any bathroom decor. The inside has a white finish and outside dark gray finish and together with the oval, clean, smooth curves makes it give off a fresh expression. It was designed by Anna Efverlund and made using stoneware. The IKEA Ekoln Soap Dish has a total height of .79” (2 cm), width of 5.12” (13 cm), and depth of 3.54” (9 cm).

The Dyson Airblade dB dries hands in 12 seconds, can draw 7.40 gallons of air per second, and is approved for food preparation environments as hands are dried with cleaner air. The Dyson Airblade dB is designed to be resistant to daily wear. This hand dryer is 71% less expensive to run than others. The Dyson Airblade dB has an overall height of 26” (66.1 cm), width of 11.875” (30.3 cm), and depth of 9.75” (24.7 cm).

The Alpine Industries Oak High Speed Commercial Hand Dryer offers an 8 second drying time, a hands-in design, high or low speed controls, and heat on or off controls. It also has a water collection reservoir to prevent water spills and safety hazards. The Alpine Industries Oak High Speed Commercial Hand Dryer has an overall height of 27.5” (69.9 cm), width of 11.75” (29.8 cm), and depth of 7.25” (18.4 cm).

The World Dryer VMax V2 hand dryer features a hands-in design that provides a 10 to 12 second drying time. It has a wide hand drying cavity and collects any residual water in a reservoir preventing a possible hazard. The hand dryer runs quietly, is ideal for sound sensitive environments. The World Dryer VMax V2 has an overall height of 26.25” (66.7 cm), width of 13” (33 cm), and depth of 9.25” (23.5 cm).

The Dyson Airblade 9kJ features offers a 10-second drying time, low running costs, and a small carbon footprint. The hand dryer also helps reduce paper waste, is 99% less expensive than single-use paper towels, and its design follows the contours of the hands. The Dyson Airblade 9kJ has an overall height of 19.625” (50 cm), width of 17.75” (45 cm), and depth of 4” (10 cm).

Homeowners tired of small soap dispensers that constantly break or cannot meet their bathroom needs will find the IKEA Kalkgrund Soap Dispenser a perfect choice. The extremely wide pump cylinder head can accommodate enough pressure to avoid destruction. It was designed by Henrik Preutz. The IKEA Kalkgrund Soap Dispenser has a height of 5.91” (15 cm), diameter of 3.15” (8 cm), and total depth of 4.17” (10.6 cm). The IKEA Kalkgrund Soap Dispenser can hold 8 oz (250 mL) of soap.

The IKEA Rinnig Soap Dispenser was designed by Mikael Axelsson with a bottle made of polypropylene and a pump of ABS plastic. However, what makes it a must-have is the black color or finish that ensures it always remains clean, a modern, minimalistic design that easily complements your bathroom. The IKEA Rinnig Soap Dispenser has a height of 7.09” (18 cm), width of 2.75” (7 cm), and total depth of 3.62” (9.2 cm). The IKEA Rinnig Soap Dispenser can hold 15 oz (450 mL) of soap.

The World Dryer VERDEdri features a 12 second drying time, a high intensity port nozzle, and 2 speed controls to customize drying time. It incorporates SteriTouch antimicrobial technology, is durable, tamper resistant and surface-mounted ADA compliant. The World Dryer VERDEdri has an overall height of 13.3125” (33.9 cm), width of 11.625” (29.5 cm), and depth of 3.9375” (10 cm).

The Dyson Airblade V features technology that dries hands in 12 seconds and is 30% quieter in comparison to the original Dyson Airblade V hand dryer. It has a slim and compact design perfect for small washrooms and spaces and is ADA compliant. The Dyson Airblade V has an overall height of 15.5” (39.4 cm), width of 9.25” (23.4 cm), and depth of 4” (10 cm).

The IKEA Ekoln Soap Dispenser easily gives a new expression whenever it is placed. This comes from the clean, smooth curves, gray color, and matte finish. It is a great addition to any bathroom. It was designed by Anna Efverlund with a container made of stoneware and pump stainless steel. The IKEA Ekoln Soap Dispenser has a height of 7.09” (18 cm), total width of 3.7” (9.4 cm), and total depth of 2.36” (6 cm). The IKEA Ekoln Soap Dispenser can hold 10 oz (300 mL) of soap.

The Excel Xlerator Hand Dryer features an 8 second dry time, adjustable speed and sound control, and heat control options like high, medium, low, and off. In comparison to paper towels the dryer offers a 95% cost savings. The hand dryer has a lifetime of over a decade and less than 1% failure rate. The Excel Xlerator Hand Dryer has an overall height of 12.6875” (32.2 cm), width of 11.75” (29.8 cm), and depth of 6.6875” (17 cm).

The IKEA Storavan Soap Dispenser was designed by Hanna-Kaarina Heikkilä with a container made of polypropylene plastic and pump glass. But what is so eye-catching about this soap dispenser is the clean design and white finish with curved edges that make it easily complement most bathroom styles. The IKEA Storavan Soap Dispenser has a height of 6.69” (17 cm), width of 3.15” (8 cm), and total depth of 3.35” (8.5 cm). The IKEA Storavan Soap Dispenser can hold 14 oz (400 mL) of soap.

The IKEA Toftan Soap Dispenser has a lightweight and straightforward design. The color and design not only work well with most decor styles but also aspire to bring a fresh, coordinated look. It was designed by P. Brickstad and P. Petersson with plastic feet to keep it in place. The IKEA Toftan Soap Dispenser has a height of 6.69” (17 cm), diameter of 3.15” (8 cm), and total depth of 3.39” (8.6 cm). The IKEA Toftan Soap Dispenser can hold 14 oz (400 mL) of soap.

The World Dryer SMARTdri features a 10 second drying time, enhances sanitation with antimicrobial technology, and uses up to 80% less energy than other hand dryers. It is also able to adjust between on and off with 3-speed motor controls. The World Dryer SMARTdri has an overall height of 13” (31.9 cm), width of 9.3” (23.6 cm), and depth of 7.6” (19.2 cm).