Type K Plug & Socket Dimensions & Drawings

Description

The Type K Plug & Socket is a 3 plug socket primarily used in Denmark and Greenland. The Type K Plug & Socket is grounded, has an amp rating of 16 A, voltage range of 220-240 V, and is compatible with plug types C and K. It is unsafely partially compatible with type E and F.

Dimensions & Sizes

The outer pins of the Type K Plug & Socket have a diameter of .19” (4.8 mm) and length of .75” (19 mm). The two pins are set .75” (19 mm) apart, while the earth pin is centered and spaced .5” (13 mm) vertically from the others. The earth pin has a width of .26” (6.5 mm), height of .16” (4 mm), and length of .55” (14 mm).

Set of dimensioned drawings of the Type K Plug & Socket labeled in plan and elevation

Description

Dimensions & Sizes

3D Model

Common Questions

How do you install an electrical socket?

Installing a replacement electrical socket is simple. Install a replacement electrical socket by turning off the main power. Prepare the cables, strip the wires, and attach the Pigtail wires. Then connect the ground wire, and attach the neutral and hot wires to the receptacle. After attach the receptacle to the box and add cover plate over the electrical socket.

What is the line and the load in an outlet?

The line of an outlet is for the incoming power supply. The wires coming from an electrical panel should be connected to the line of the outlet. The load of an outlet is for power that is going out of the outlet. If you are installing other outlets, the other electrical wires should be connected to the load side of the outlet.

How do you tell if an electrical socket has power?

When you can’t tell if an electrical socket has power first try to plug in something else to see if the outlet works. If the electrical socket does not power anything it most likely has no power and its voltage should be tested with a multimeter. If no other electrical sockets are working it is most likely a problem with the circuit.

How do you install an electrical socket?

What is the line and the load in an outlet?

How do you tell if an electrical socket has power?

What items are considered fixtures in residential property?

Items considered fixtures in a residential property are items that are part of the house or apartment which are permanent and service the people living within the residence. An item is considered a fixture if it is affixed to the ceiling, floor, or wall through screws, cements, pipes, nails or glue. Examples of fixtures are built-in bookcases, plumbing, ceiling lights, wall mounted shelving, washers, dryers and awnings.

What are the required fixtures in a residential building?

Generally, the required fixtures in a residential building are fitted kitchen units, cupboards, ovens and sinks. Other required fixtures are bathroom sinks, faucets, tubs, central heating systems, and dishwashers. Typically the fixtures are either defined on the deed of the property, or apartment lease.

How often should household fixtures be replaced or upgraded?

How often a household fixture should be replaced depends on the type of fixture. Washing machines should be replaced every 8 to 12 years. The HVAC system typically lasts 15 to 20 years. Water heaters older than 10 years should be replaced. Generally, faucets will need to be replaced every 15 years, and most sinks will stay in working condition for 50 years.

What items are considered fixtures in residential property?

What are the required fixtures in a residential building?

How often should household fixtures be replaced or upgraded?

View of the Type K Plug & Socket in 3D available for download

Under Development

Height:

Width:

Depth:

Length:

Weight:

Area:

Pins: 3 
Used in: Denmark and Greenland
Compatibility: Types C and K; unsafe partial compatibility with type E and F
Amp Rating: 16 A
Circuit: Grounded 
Voltage: 220-240 V 

Pin Width: .19” | 4.8 mm
Pin Length: .75” | 19 mm
Earth Pin Width: .26” | 6.5 mm
Earth Pin Height: .16” | 4 mm
Earth Pin Length: .55” | 14 mm
Pin Centers: .75” | 19 mm
Earth Pin Vertical Center: .5” | 13 mm

Drawings include:
Type K Plug & Socket socket elevation, plug plan, plug elevation

IEC - Type K Plug & Socket

Wikipedia - AC Power Plugs & Sockets
International Electrotechnical Commission (IEC)

2D Downloads

For 2D Downloads of this element, upgrade to a Dimensions Pro Membership. Available in DWG (CAD, Imperial & Metric), SVG, JPG formats

For 2D Downloads of this element, renew your Dimensions Pro Membership. Available in DWG (CAD, Imperial & Metric), SVG, JPG formats

3D Downloads

For 3D Downloads of this element, upgrade to a Dimensions Pro Membership. Available in 3DM (Rhino), OBJ (NURB), SKP (Sketchup) formats

For 3D Downloads of this element, renew your Dimensions Pro Membership. Available in 3DM (Rhino), OBJ (NURB), SKP (Sketchup) formats

Ad Blocker

Enjoy free drawings? We do too!
Advertising helps fund our work.
Please support the project by disabling
or whitelisting your ad blocker while browsing Dimensions.Guide. Thanks!