Dempsey Low Profile 4-Blade Ceiling Fan Dimensions & Drawings

Description

The Dempsey Low Profile 4-Blade ceiling fan should be placed in a dry location and has a dimmable light. The ceiling fan is ideal for a small room up to 12’ x 14’ (3.7m x 4.3m) or low ceilings and it can be controlled with a remote control. Its design provides the space a contemporary look and is available in 2 finishes.

Dimensions & Sizes

The Dempsey Low Profile 4-Blade Ceiling Fan has a height of 11” (27.9 cm) and diameter of 44” (111.8 cm).

Description

Dimensions & Sizes

The Dempsey Low Profile 4-Blade Ceiling Fan has a height of 11” (27.9 cm) and diameter of 44” (111.8 cm).

3D Model

Common Questions

What size ceiling fan do I need?

The recommended size of a ceiling fan is dependent on the size of the room. For a room up to 75 sq. ft, the maximum diameter for the fan should be 36 inches or a range between 29”-36” (73.7-91.4 cm). Up to 175 sq. ft calls for a maximum diameter of 48 inches or a range between 42” to 48” (106.7-121.9 cm).

How do you balance a ceiling fan?

Before attempting to balance a ceiling fan, make sure the blades are not warped. If so, they will need to be replaced. Check the screws of the mounting bracket, electrical box, and fan itself and tighten them if needed. Any bent blade can be adjusted by carefully pushing up or down on the bracket. Each blade should have the same distance from its tip to the ceiling.

How do you remove a ceiling fan?

To remove a ceiling fan, first determine whether the fan is down-rod mounted or bracket mounted. For both, make sure the power is off. Remove the metal cover of the mounting bracket to clearly see the ball at the top of the fan pole. Next, remove the wire nuts of the electrical connections, hold onto the light fixture and move the ball positioned at the top of the fan pole from the mounting bracket. The final step is to remove the mounting bracket from the ceiling. For a flush mounted fan, detach the blades and undo the screws that secure the fan to the ceiling bracket. Remove the fan body then the mounting bracket.

What size ceiling fan do I need?

How do you balance a ceiling fan?

How do you remove a ceiling fan?

What items are considered fixtures in residential property?

Items considered fixtures in a residential property are items that are part of the house or apartment which are permanent and service the people living within the residence. An item is considered a fixture if it is affixed to the ceiling, floor, or wall through screws, cements, pipes, nails or glue. Examples of fixtures are built-in bookcases, plumbing, ceiling lights, wall mounted shelving, washers, dryers and awnings.

What are the required fixtures in a residential building?

Generally, the required fixtures in a residential building are fitted kitchen units, cupboards, ovens and sinks. Other required fixtures are bathroom sinks, faucets, tubs, central heating systems, and dishwashers. Typically the fixtures are either defined on the deed of the property, or apartment lease.

How often should household fixtures be replaced or upgraded?

How often a household fixture should be replaced depends on the type of fixture. Washing machines should be replaced every 8 to 12 years. The HVAC system typically lasts 15 to 20 years. Water heaters older than 10 years should be replaced. Generally, faucets will need to be replaced every 15 years, and most sinks will stay in working condition for 50 years.

What items are considered fixtures in residential property?

What are the required fixtures in a residential building?

How often should household fixtures be replaced or upgraded?

Under Development

Height:

11” | 27.9 cm

Width:

44” | 111.8 cm

Depth:

44” | 111.8 cm

Length:

Weight:

18.3 lb | 8.3 kg

Area:

Power: 60 W

Materials:

Oak blades; metal support

Designer:

Hunter

Drawings include:
Dempsey Low Profile 4-Blade Ceiling Fan side elevation, plan

AllModern - Dempsey Low Profile 4-Blade Ceiling Fan

Wikipedia - Ceiling Fan

2D Downloads

For 2D Downloads of this element, upgrade to a Dimensions Pro Membership. Available in DWG (CAD, Imperial & Metric), SVG, JPG formats

For 2D Downloads of this element, renew your Dimensions Pro Membership. Available in DWG (CAD, Imperial & Metric), SVG, JPG formats

3D Downloads

For 3D Downloads of this element, upgrade to a Dimensions Pro Membership. Available in 3DM (Rhino), OBJ (NURB), SKP (Sketchup) formats

For 3D Downloads of this element, renew your Dimensions Pro Membership. Available in 3DM (Rhino), OBJ (NURB), SKP (Sketchup) formats

Ad Blocker

Enjoy free drawings? We do too!
Advertising helps fund our work.
Please support the project by disabling
or whitelisting your ad blocker while browsing Dimensions.Guide. Thanks!