Rheem Mid Efficiency Tankless Gas Water Heater - 8.4 GPM Dimensions & Drawings

Comparison drawing of Rheem Mid Efficiency Tankless Gas Water Heater - 8.4 GPM compared to other hot water heaters

Description

The Rheem Mid Efficiency Tankless Gas Water Heater (8.4 GPM) is a series of mid-efficiency tankless gas water heaters with low emission (ultra-low NOx) and designed to release hot water continuously. The tank can be installed at high altitude above sea level without affecting performance and come with various accessories for high demand applications. The tank can be installed indoors or outdoors and is powered by either propane or natural gas.

Dimensions & Sizes

The Rheem Mid Efficiency Tankless Gas Water Heater (8.4 GPM) has an overall height of 25.625” (65.1 cm), width of 13.875” (35.2 cm), and depth of 9.875” (25.1 cm). The Rheem Mid Efficiency Tankless Gas Water Heater (8.4 GPM) weighs 54 lb (24.5 kg) and has a maximum flow rate of 8.4 gallons per minute.

Set of dimensioned plan and elevation drawings of the Rheem Mid Efficiency Tankless Gas Water Heater (8.4 GPM)

Description

Dimensions & Sizes

3D Model

Common Questions

What size water heater do I need?

Determining what size water heater is needed requires figuring out the amount of water one uses during the busiest hour, or the time of day when the most hot water usage occurs. For a general estimate, a household of 1 to 2 people requires 30-40 gallons (114-151 liters). A household of 2 to 3 people calls for 40-50 gallons (151-189 liters) and 50-60 gallons (189-227 liters) for 3 to 4 people.

How long do water heaters last?

The general lifespan of a water heater ranges from 8 to 12 years. The exact life expectancy is dependent on the quality of water and installation as well as the overall design of the unit. A water heater headed towards 10 years is typically due for a replacement.

How do you install a water heater?

For a gas water heater, disconnect the gas and water lines and detach the gas exhaust. Then, set the water heater in position. Install both the heat valves and water line connections. The last step is to attach the gas line. For an electric water heater, move it into a drain pan and install both the T&P valve and discharge pipe. After, attach the hoses and fill up the water heater by removing the aerator and turning on the water supply. Connect any wiring and check that the tank is full by turning on the faucet.

What size water heater do I need?

How long do water heaters last?

How do you install a water heater?

What items are considered fixtures in residential property?

Items considered fixtures in a residential property are items that are part of the house or apartment which are permanent and service the people living within the residence. An item is considered a fixture if it is affixed to the ceiling, floor, or wall through screws, cements, pipes, nails or glue. Examples of fixtures are built-in bookcases, plumbing, ceiling lights, wall mounted shelving, washers, dryers and awnings.

What are the required fixtures in a residential building?

Generally, the required fixtures in a residential building are fitted kitchen units, cupboards, ovens and sinks. Other required fixtures are bathroom sinks, faucets, tubs, central heating systems, and dishwashers. Typically the fixtures are either defined on the deed of the property, or apartment lease.

How often should household fixtures be replaced or upgraded?

How often a household fixture should be replaced depends on the type of fixture. Washing machines should be replaced every 8 to 12 years. The HVAC system typically lasts 15 to 20 years. Water heaters older than 10 years should be replaced. Generally, faucets will need to be replaced every 15 years, and most sinks will stay in working condition for 50 years.

What items are considered fixtures in residential property?

What are the required fixtures in a residential building?

How often should household fixtures be replaced or upgraded?

3D model of the Rheem Mid Efficiency Tankless Gas Water Heater (8.4 GPM) viewed in perspective

Under Development

Height:

25.625” | 65.1 cm

Width:

13.875” | 35.2 cm

Depth:

9.875” | 25.1 cm

Length:

Weight:

54 lb | 24.5 kg

Area:

Max GPM: 8.4 
UEF: .82

Type:

Tankless Gas Water Heater

Designer:

Rheem

Drawings include:
Rheem Mid Efficiency Tankless Gas Water Heater (8.4 GPM) front elevation, side, plan

Rheem - Mid Efficiency Tankless Gas Water Heater - 8.4 GPM

Wikipedia - Water Heating

2D Downloads

For 2D Downloads of this element, upgrade to a Dimensions Pro Membership. Available in DWG (CAD, Imperial & Metric), SVG, JPG formats

For 2D Downloads of this element, renew your Dimensions Pro Membership. Available in DWG (CAD, Imperial & Metric), SVG, JPG formats

3D Downloads

For 3D Downloads of this element, upgrade to a Dimensions Pro Membership. Available in 3DM (Rhino), OBJ (NURB), SKP (Sketchup) formats

For 3D Downloads of this element, renew your Dimensions Pro Membership. Available in 3DM (Rhino), OBJ (NURB), SKP (Sketchup) formats

Ad Blocker

Enjoy free drawings? We do too!
Advertising helps fund our work.
Please support the project by disabling
or whitelisting your ad blocker while browsing Dimensions.Guide. Thanks!